"We've worked with AHHAC for 17 years now. They've installed and serviced our hot water plant across three commercial buildings. They pick up the phone on weekends — that's why we keep coming back."

Hydronic heating, cooling and hot water for Toorak homes — designed and installed by AHHAC, Melbourne's hydronic specialists, from our nearest showroom in Laverton North.
Hydronic heating in Toorak is usually a whole-home, multi-zone system: in-slab underfloor driven by an all-electric heat pump, with designer radiators and towel rails from De'Longhi or IMAS where a room needs fast warmth or a feature piece. Melbourne's −1 °C design temperature and long winters make careful zoning essential in large homes. AHHAC designs every Toorak system from a room-by-room heat-loss calculation and installs it from our Laverton North showroom.
Reviewed by the AHHAC Technical Team — licensed plumbers & hydronic engineers, NSW Lic 262528C.How we write & review

ImmergasSimeThermaSkirt™Toorak's grand inner-east Melbourne homes — heritage mansions, architect-designed rebuilds and luxury apartments — set the standard for hydronic heating in Australia. Owners here expect flawless, invisible comfort, and hydronic delivers it: silent, even warmth with no ducts, no vents and no noise. AHHAC designs and installs the full luxury hydronic range across Toorak, from sculptural designer radiators to whole-home in-slab underfloor heating.
For Toorak's substantial multi-level homes we specify all-electric heat pump hydronic heating with per-zone MAXA controls, giving independent comfort in every room and silent chilled-water cooling through Melbourne's summers. Toorak is served from our Laverton North showroom, part of AHHAC Melbourne.
The bigger the home, the more a hydronic system depends on decisions made at drawing stage. In a multi-level Toorak residence the heat source is the easy part. What makes or breaks comfort is where the plant lives, how the house is split into zones, and whether the emitters chosen for each room can actually heat it at heat-pump water temperatures.
A whole-home system needs more than a heat pump. There is a buffer tank, circulating pumps, a manifold for each level and often a hot water cylinder, plus room to service all of it. We ask for a dedicated, ventilated space in the basement or garage with a clear pipe route to the outdoor unit. That unit needs free airflow and a position away from bedrooms and neighbouring windows; on a large block, a side setback or a screened roof area usually works.
Zone by how rooms are used. Formal living and dining rooms used a few evenings a month shouldn't run on the same schedule as the family kitchen. Guest suites, a home office, a gym and the main bedroom each get their own zone; wine cellars and plant rooms get none. Double-height voids and open stairwells carry warm air upstairs, so upper-level zones often need less output than their floor area suggests. Everything runs on MAXA smart controls, so the whole house can be managed from one app rather than a wall of separate thermostats.
Designer radiators that perform. Sculptural pieces from IMAS and De'Longhi look superb, but some designs give out less heat for their size than a plain panel, especially at the lower water temperatures that keep a heat pump efficient. We check every chosen model against its room's heat loss before it is ordered, and tell you early if a feature piece needs a larger size or a partner panel elsewhere in the room.
Many Toorak homes already have an older gas hydronic system. Where the pipework is sound we usually keep it, flush it and convert to a heat pump rather than starting again; our heat pump hydronic heating Melbourne page explains how that conversion works.
Written from on-site experience by the AHHAC Technical Team.
AHHAC's in-house design and service team — licensed plumbers and hydronic engineers (Lic 262528C) who have designed and installed 2,400+ hydronic heating, cooling and hot water systems across Australia since 1998.
We design hydronic heating from a room-by-room heat-loss calculation, install it with our own licensed plumbers to AS/NZS 3500 (plumbing) and AS/NZS 5601 (gas), commission and document it, and service it for the life of the system. Nothing is subcontracted out.
Last updated · AHHAC — serviced from Laverton North
"We've worked with AHHAC for 17 years now. They've installed and serviced our hot water plant across three commercial buildings. They pick up the phone on weekends — that's why we keep coming back."
"We commissioned AHHAC after another contractor abandoned the job halfway. They took over the design, fixed the existing issues, finished the install and gave us a five-year warranty. They saved the project."
"AHHAC delivered our 22-zone underfloor system on time, on budget and to spec. The crew were tidy, the documentation was thorough, and the commissioning was textbook. Couldn't ask for more from a trade partner."